sinziana
01-20 01:04 PM
I am a teacher at an NGO. I am not sure if I understood your question, but hope this helps,,,
First, you have to comply with the state procedures for teacher certification and eligibility. You need the work/H1B visa; the procedure is same as that for all other jobs. The school/orgaization should be ready/willing to sponsor one for a work visa.
sdudeja, nice to meet another teacher on the forum!
hi,
tell me please how is this NGO
i AM teacher and I am looking for ajob in USA
THANKS
First, you have to comply with the state procedures for teacher certification and eligibility. You need the work/H1B visa; the procedure is same as that for all other jobs. The school/orgaization should be ready/willing to sponsor one for a work visa.
sdudeja, nice to meet another teacher on the forum!
hi,
tell me please how is this NGO
i AM teacher and I am looking for ajob in USA
THANKS
wallpaper I Miss You Mom Poems. I love
piyu7444
07-13 05:29 PM
Thanks for all who replied...
Did anyone travel to India, by landing at Delhi Intl airport, and then proceeding to other destination city through a domestic airline?
Never been to Delhi, and I have no idea how Intl and domestic travel works in tandem...
Thanks
Almost every time landed @ delhi and then got to a domestic flight (@ Indore - lot of times)
It all depends on your international arrival and next connection to domestic city (how long is lay over?) You can get a good connection from New york to mumbai to indore with airline A due to its flight schedule but you might not get the same ''good connection'' with airline B as it just has a different schedule.
So it depends on the following
-From where you fly
-When you reach
-When is the first avaiable domestic flight
-how much is the total cost
:)
Did anyone travel to India, by landing at Delhi Intl airport, and then proceeding to other destination city through a domestic airline?
Never been to Delhi, and I have no idea how Intl and domestic travel works in tandem...
Thanks
Almost every time landed @ delhi and then got to a domestic flight (@ Indore - lot of times)
It all depends on your international arrival and next connection to domestic city (how long is lay over?) You can get a good connection from New york to mumbai to indore with airline A due to its flight schedule but you might not get the same ''good connection'' with airline B as it just has a different schedule.
So it depends on the following
-From where you fly
-When you reach
-When is the first avaiable domestic flight
-how much is the total cost
:)
calboy78
07-27 03:30 PM
EAD is only required if you want to work and you don't have any other document which will allow you to work (e.g. a valid un-expired H1)
Cheers :)
Hi,
My I-140/I-485 are pending. I had also applied for my EAD card which I received promptly. The EAD card will expire in October, 2008. You know, at least until the I-140 gets approved, I don't need the EAD card. Can I just let it expire and renew it when I need it? Or will it be a separate application when I try to renew an expired EAD.
Thanks.
Cheers :)
Hi,
My I-140/I-485 are pending. I had also applied for my EAD card which I received promptly. The EAD card will expire in October, 2008. You know, at least until the I-140 gets approved, I don't need the EAD card. Can I just let it expire and renew it when I need it? Or will it be a separate application when I try to renew an expired EAD.
Thanks.
2011 i miss you mom poems. i love
unseenguy
06-19 01:18 PM
Hello Unseenguy,
Thanks for the reply .
I forgot to mention that i was already on h1 before so i dont fall under H1CAP.
This is the reason i applied for H1 from h4 as previously i was on H1B
Yes but you can not work on H4, just after filing H1 papers. So what you do is, go to Chennai and get a stamp that should not be a problem.
Thanks for the reply .
I forgot to mention that i was already on h1 before so i dont fall under H1CAP.
This is the reason i applied for H1 from h4 as previously i was on H1B
Yes but you can not work on H4, just after filing H1 papers. So what you do is, go to Chennai and get a stamp that should not be a problem.
more...
stirfries
03-18 09:31 PM
I'm from the UK and we've now been told I cannot leave the US and join him, until I have my advance parole which could take 3 to 4 months.
Smerchas...Are you sure about what this? From what I remember, you have to be in the country when you apply for your AP...But there is no necessity that you need to be here when it is approved !
Technically, you can ask your attorney or the person who is living at the address where the AP document would be sent by the USCIS, and request them to forward the approved AP to your then current address...That way, you don't have to stay in the country while USCIS processes your application...
Ofcourse, the flip side is, if your AP is denied for any reason, you would have to go to the US consulate in wherever country you are and request the special admission letter...
Thanks,
Smerchas...Are you sure about what this? From what I remember, you have to be in the country when you apply for your AP...But there is no necessity that you need to be here when it is approved !
Technically, you can ask your attorney or the person who is living at the address where the AP document would be sent by the USCIS, and request them to forward the approved AP to your then current address...That way, you don't have to stay in the country while USCIS processes your application...
Ofcourse, the flip side is, if your AP is denied for any reason, you would have to go to the US consulate in wherever country you are and request the special admission letter...
Thanks,
optimist578
01-19 12:31 PM
I have observed, based on stories from different people that NSC sends RFEs when one tries to upgrade a non-premium I-140 case to premium. Does NSC send RFEs for premium cases? Till now, I have only heard NO.
No matter how hard I try, my lawyer keeps insisting that my case should not be upgraded to premium, because if an RFE is served, it might delay the case even more (implying, more than how long a regular case takes).
The whole thing does not seem to make any sense. If an applicant files under premium processing, according to NSC, his/her application is more reliable (and honest?) than if some one who files it on non-premium basis?
.
No matter how hard I try, my lawyer keeps insisting that my case should not be upgraded to premium, because if an RFE is served, it might delay the case even more (implying, more than how long a regular case takes).
The whole thing does not seem to make any sense. If an applicant files under premium processing, according to NSC, his/her application is more reliable (and honest?) than if some one who files it on non-premium basis?
.
more...
zeta7
03-23 04:38 PM
i don't think anyone would be able to use first EAD filed during July/Aug time frame as I-140 itself will take more than 1 yr.. or longer who knows...money wasted on EAD.
Ok, this might seem like a really basic question considering most of you guys are at the guru level regarding these matters, but does your I-140 need to be approved before you can use your EAD? More importantly (as in my case), can I use my AP to travel if both my I-140 and I-485 are still pending?
Thanks..
Ok, this might seem like a really basic question considering most of you guys are at the guru level regarding these matters, but does your I-140 need to be approved before you can use your EAD? More importantly (as in my case), can I use my AP to travel if both my I-140 and I-485 are still pending?
Thanks..
2010 2011 i miss you mom quotes. we
extra_mint
05-16 01:31 PM
PD June 12, 2006 NSC
Waiting for my spouse's GC (dependent)
I got mine (primary) over the weekend. Any one else in same boat ?
Me and my spouse didn't applied together, I added her in 2008.
Waiting for my spouse's GC (dependent)
I got mine (primary) over the weekend. Any one else in same boat ?
Me and my spouse didn't applied together, I added her in 2008.
more...
GCKaMaara
12-03 02:19 PM
Good news obviously but I would not jump on it. 2 reasons - we need to make sure they don't keep this practice & second, I don't trust the source of information 100% based on past information.
I support ItIsNotFunny, PD_Recapturing, NK2006..... for their efforts on AC21 issue.
This in from Ron Gotcher website....I guess they are reading our letters.....
Good news concerning AOS denials based on I-140 revocations
--------------------------------------------------------------------------------
__________________
I support ItIsNotFunny, PD_Recapturing, NK2006..... for their efforts on AC21 issue.
This in from Ron Gotcher website....I guess they are reading our letters.....
Good news concerning AOS denials based on I-140 revocations
--------------------------------------------------------------------------------
__________________
hair pictures i love you mom poems
53885
08-16 07:20 PM
According to the EAD, she can work. She has TIN number, but I am not sure if she can use that...
TIN is not SSN. Employer would need SSN.
I guess we need another tracker for those who received EAD, but no SSN.
TIN is not SSN. Employer would need SSN.
I guess we need another tracker for those who received EAD, but no SSN.
more...
papajon
06-18 02:23 PM
Sorry to hear that. I don't know the answer to your original question but I hope you have a way of extending your H1?
The lawyer said H1 can be extended while the appeal is still pending.
The lawyer said H1 can be extended while the appeal is still pending.
hot i miss you dad poems.
kaarmaa
05-04 11:48 AM
What happens, once he moves to the new employer and his present employer withdraws I-140? For any subsequent H1 transfers/extensions will he will need to have an approved I-140, which is not withdrawn ?
Could there be issues, if new employer does a lay off what happens when perm/i-140 is pending or not filled yet
Correct. Withdrawn I-140 cannot be used to transfer or extend a H1 that has expired (after 6 years).
The following statement may be incorrect. Please consult an attorney
You can again transfer to a new employer for the reminder of the H1 validity without I-140 or PERM. After it expires, to extend or transfer again, you would need an approved PERM or I-140.
Could there be issues, if new employer does a lay off what happens when perm/i-140 is pending or not filled yet
Correct. Withdrawn I-140 cannot be used to transfer or extend a H1 that has expired (after 6 years).
The following statement may be incorrect. Please consult an attorney
You can again transfer to a new employer for the reminder of the H1 validity without I-140 or PERM. After it expires, to extend or transfer again, you would need an approved PERM or I-140.
more...
house i miss you dad poems. i love
kirupa
07-27 02:59 PM
Ah - glad you found the answer. I was thinking that because ShowDialog is a modal dialog, it may be blocking any operations that are going on in the background. I failed to realize that OpenFileDialog does not have a non-modal Show method which displays the dialog without forcing it to have all of the app's attention.
:)
:)
tattoo 2011 we love you mom poems. i
sanjay
08-29 12:29 PM
I saw many 2nd July Polls but doesn't have full proof information.
So thaught creating New Poll.
Hope everyone will participate in the Poll.
where is the poll? Any way there more than 5 - 6 polls as of now and there is no way to find a full proof information. We all do more speculations and analysis. So, no need to create new threads with these polls. We got many.
So thaught creating New Poll.
Hope everyone will participate in the Poll.
where is the poll? Any way there more than 5 - 6 polls as of now and there is no way to find a full proof information. We all do more speculations and analysis. So, no need to create new threads with these polls. We got many.
more...
pictures mom, i wanted to tell you that #39;i love you#39; mom, I Miss You Mom Poems
gmb
03-10 12:35 AM
You are not suppossed to submit the i-94 which you received along with 797. Submit only the POE i-94.
It was told by Officer when i had a issue with the visa date not mentioned in the i-94 during re-entry.
That's not TRUE. You are supposed to submit all your I-94s. Maybe, the officer meant the other half of I-94 card attached to your I-797 which is for your personal records. The actual I-94 attached to your I-797 (right half at the bottom) SHOULD BE returned along with the original I-94 to the airport authorities.
It was told by Officer when i had a issue with the visa date not mentioned in the i-94 during re-entry.
That's not TRUE. You are supposed to submit all your I-94s. Maybe, the officer meant the other half of I-94 card attached to your I-797 which is for your personal records. The actual I-94 attached to your I-797 (right half at the bottom) SHOULD BE returned along with the original I-94 to the airport authorities.
dresses tattoo i miss you mom poems. i
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
more...
makeup Mom, we miss you so very much
shruthii_1210@yahoo.com
09-30 08:05 PM
All the above answers are favor to the employer and not to us (employee).
Can any of you help by posting some ideas (for changing the employer before 180 with the approved i140 and EAD cards) in favor of the employee bcz i am really very sad about my situation. plz help brothers !!
Thanks
karthick
Can any of you help by posting some ideas (for changing the employer before 180 with the approved i140 and EAD cards) in favor of the employee bcz i am really very sad about my situation. plz help brothers !!
Thanks
karthick
girlfriend Mother I Miss You Lyrics Mom)
pd_recapturing
04-28 08:32 AM
I also exactly same cris email as legal_A_IN_limbo yesterday. My employer revoked my H1B.
Do not go by wordings of this message. I have not heard any message that says that previously approved H1B is revoked. I think, this is standard message that indicates that H1B has been revoked.
Do not go by wordings of this message. I have not heard any message that says that previously approved H1B is revoked. I think, this is standard message that indicates that H1B has been revoked.
hairstyles best love poems for girl.
hojo
09-06 07:12 PM
what he said.
awesome links dan, you'll be getting some messages from me on AIM, heh
awesome links dan, you'll be getting some messages from me on AIM, heh
sweet_jungle
01-10 04:39 AM
I am interested in exploring the AC-21 option.
My sponsoring company is a big company and I think they wont revoke 140. 140 was approved in 2006. 485 filed in july,2007.
Any recommendation for AC-21 attorneys?
Can an attorney force me to file AC-21 even if i dont want to?
My sponsoring company is a big company and I think they wont revoke 140. 140 was approved in 2006. 485 filed in july,2007.
Any recommendation for AC-21 attorneys?
Can an attorney force me to file AC-21 even if i dont want to?
krishnam70
05-05 01:47 PM
Hi All,
Recently I received an RFE on my Wife's 485 application asking to prove that we both are still married. My lawyer is asking for around $400 to respond to this RFE, We have already paid the lawyer about $7500 until now for our GC process and she is no longer the preferred lawyer for the company that I am working for, but I had to keep my case with her as she has processed all of my applications until now. My questions are:
1. Can we ourselves respond to the RFE and save the $400.00,
2. If so, What's the process and what documents that we need to send to prove that we are still married.
Appreciate all of your help in this regard.
Thanks
http://immigrationvoice.org/wiki/index.php/US_I-485_RFE_Bonafide_Marriage
-cheers
kris
Recently I received an RFE on my Wife's 485 application asking to prove that we both are still married. My lawyer is asking for around $400 to respond to this RFE, We have already paid the lawyer about $7500 until now for our GC process and she is no longer the preferred lawyer for the company that I am working for, but I had to keep my case with her as she has processed all of my applications until now. My questions are:
1. Can we ourselves respond to the RFE and save the $400.00,
2. If so, What's the process and what documents that we need to send to prove that we are still married.
Appreciate all of your help in this regard.
Thanks
http://immigrationvoice.org/wiki/index.php/US_I-485_RFE_Bonafide_Marriage
-cheers
kris
0 comments:
Post a Comment